Jayshree Mahalaxmi Industries

Multi Mill a self - contained portable unit useful for high-speed granulation, pulverizing, mixing, shredding and chopping of wide range of wet and dry granules with special attachments called beater which have Knife/Impact blades and Scrapper blades (Standard) to get the required size.Desired output of product depends on model selection which are direct driven, belt driven, and screen size & motor HP. Multi Mill is widely used in pharmaceutical industries, food industries, Research lab& pharmacy colleges for education purposes, etc.

Additional Information:

• Production Capacity: As per req.
• Delivery Time: within 4 weeks
• Packaging Details: packed in wooden box

The double cone blender is used to produce homogeneous mixture of dry powder and granules. Mixing is a one of the common step in the manufacturing of tablets, food, chemicals, cosmetics, detergents, fertilizers and plastics. The SLANT double cone design eliminates dead spots for mixing to get the effective volume for optimum homogeneity is between 35-70% of gross volume.

Salient Features All contact parts are made of SS316 and non-contact parts are made of SS304 Design as per cGMP - Current Good Manufacturing Practices compliance The conical shape at both ends enables uniform mixing and easy discharge Dust free bin charging system provided The cone is statically balanced to protect the gear box and motor from any excessive load Safety guard provided to ensure maximum safety of operator Fully Automatic operation based on PLC control (optional)

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: 4-6 weeks
• Packaging Details: packed in wooden box

Vibratory sifter is used in shifting of materials in pharmaceutical manufacturing with different mesh of Sieves and it is widely used in pharmaceuticals and Food Industries.

This innovative range of fibro sifters are specifically designed to remove oversize contamination from liquid or powder products. With its compact design, these range of vibratory sifters can fit anywhere into a production line at less than half the height of traditional sifters, but still provide operators with considerable screening capacity.

Available in a wide variety of sizes and options, our range can be customized to fit your exact specifications, and is ideal for high-capacity safety screening of liquid slurries and powders. With a higher throughput per unit mesh area, this range of vibratory sifters can increase production when compared to conventional vibratory sieves.

Moreover, its easy-to-clean design means that production downtime is reduced as the Vibro sifter unit can be easily stripped down and cleaned without tools, and its enclosed screening allows for complete containment, eliminating harmful dust and fumes. Our Machine operates at lower noise levels, due to a solid rubber suspension which allows the machines to operate as low as 70 DBA, protecting operator health.

 

Salient Features:

 

•              All Contact parts are made from SS316/SS316L.

•              Design as per cGMP - Current Good Manufacturing Practices compliance

•              Quick Screen Changes-Quick release device is provided to replace the screen with less time

•              Various material separation range- power or particle, wet or dry, heavy or light, coarse or fine, hot or cold.

•              Various size range-available diameter from 400mm to 2000mm, mesh size

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: 4-6 weeks
• Packaging Details: Packing will be done in Wooden Crate

Established as Sole Proprietorship firm in the year 1992 at Ahmedabad (Gujarat, India), we “Jay Shree Mahalaxmi Industries” are a renowned manufacturer and trader of premium quality range.

Additional Information:

• Production Capacity: As per Req.
• Delivery Time: within 4-6 weeks
• Packaging Details: packed in wooden box

JSM Co-Mill is the new innovation to the industry with a combination of our experience and industry demand, for multiple operation in a single source. The food & pharmaceutical industry demand extremely high degree of hygiene and safety during the process. That only can be achieved through basic equipment with high degree of versatility, quick response and Users friendly in a compliance of cGMP standard.

 

As compared to the four common principles of size reduction i.e., grinding, compression, impact and shearing, which often do not product-controlled size reduction, this machine utilizes the principle of Centrifugal Shearing force.

Now recognized for use in applications throughout the Pharmaceutical, Food, Chemical, Personal Care and Cosmetics industries worldwide, the JSM Co-mill is coveted by process managers looking to achieve optimum process efficiency and product consistency.

 

Salient Features:

 

•              The fines generated are on a lower side as compare to other mills

•              Heat generation in co mill is comparatively very low as it works on forced pressure

•              Very High Output and Low dusting compared to other mills.

•              Wet and Dry both milling operations can be achieved.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: 4-6 weeks
• Packaging Details: Packing will be done in Wooden Crate

Vibratory sifter is used in shifting of materials in pharmaceutical manufacturing with different mesh of Sieves and it is widely used in pharmaceuticals and Food Industries

The Oscillating Granulator is a popular granulating machine used for size reduction or forming the required granule sizes from moist powder material or for crushing dried block stock, sensitive powders, and granules in the pharmaceutical, chemical and food industries. Oscillating Granulators make the quality of granules better by facilitating their flowability and handling.The Oscillating Granulator has one rotor, which oscillates on a horizontal axis. There is one screen of your required mesh size mounted at the bottom of the rotor which can be removed and remounted easily; its tension is also adjustable. Product is loaded from the top through the infeed hopper, and material falls on the rotor blade. The particles are broken down by a set the oscillating rotors as it moves from side to side. The sharp edges on the rotor, the oscillating movement of the rotor, and subsequent pressure of the product against the screen allows the size reduction of the granular material to take place as the material gets pushed through the screen mesh. (multiple screens available of various mesh sizes).The driving mechanism is totally enclosed in the machine body and its lubrication system improves the lifetime of the mechanical components. These granulators are constructed with quality stainless steel to meet the GMP standard.Salient Features:• Robust, Simple & Compact Design.• All Product contact parts AISI 316 & non-contact parts AISI 304.• Easy Installation in Production Line.• Oscillating Rotor Motion.• High Flame proof motor and Push Button Station. (optional)• Inline granulation with Roll compactor & Tipper with FBD Bowl. (optional)• High Output with Uniform Granules, Less Fines.• Low noise level as per international norms.• Zero dusting & maintenance free.• Limit switch at charging hopper & over load relay protection.• Easy for Cleaning.

Additional Information:

• Production Capacity: As per Req.
• Delivery Time: Within 4-6 weeks
• Packaging Details: packed in wooden box

Roll Compactor Machine is used for dry granulation method. It forces the fine powders between two counter rotating rollers and presses the fine powders in a solid compact or sheets, so called chips or flakes. Finally, these chips or flakes are then reduced in size to the desired granules/grain size further with the help of Oscillating Granulator Machine or Multi Mill Machine or Comminuting Mill or Sizing Machine.The sieve size should be selected very carefully in order to prevent the generation of fines. The selected sieve defines the final granules/grains size. Also, further to achieve excellent granules/grains can be made dust free by Screening (Sifter) Machine. The separated fines also can be Re-compacted/ Recycle with Roll Compactor Machine. In the process of compaction, the fine powder or crystalline powder are fed to the charging hopper of the Roll Compactor. Here the vertical feed screw feeds the powder into the compacting zone of the compacting rollers through the pre-compacting chamber.15The adjustable speed (through AC Variable Frequency Drive – AC VFD) of feed screw pressures the powder to pass strictly between the compacting rollers gap and therefore strong/hard chips/flakes forms from the fine or crystalline powder. After proper synchronization of Roller Speed & Feed Screw Speed with proper flakes quality, the same speed ratio can be continuing to achieve the more output (if the speed limit permits the machine rated roller & feed screw speed) from the same machine model. The Roller surface can be selected depending upon the characteristics of the powder/product. If the products are well familiar with the Roll Compactor Machine, our Technical Team can suggest the perfect roller surface for the particular product base on an experience & expertise for it. For product development or evaluation of product or changing the concept of granulation method, or achieving the dust free granules in order to get the Export quality granules, we are always happy to carry out the trails with your material in our plant.Salient Features:
• In Compliance with cGMP guidelines.
• Useful for Formulation as well as API Units
• Available with Corrugated, Knurling & Briquetted Rollers.
• Contact Parts are made of S.S. 316 except rollers.
• Very compact design available in Plain, Water Jacketed or Flameproof Model.
• Screw is driven through AC Variable Frequency Drive. Safety slipping clutch between gearbox and feed screw.
• ELNP (Electroless Nickel Plating) or Hard chrome plated with mirror finished compacting rolls made of tools steel.
• Rolls drive through twin’s shaft gearbox with drive unit coupled to it using coupling, which ensures synchronization of the rolls with a steady torque loading.
• Pre-Compression chamber guides the products to roll without any slippage or leakage.
• Pre-densifier screw comprises of cylindrical or conical shape, which is well polished and made of AISI SS-316 quality material.
• The feed screw assembly can be lifted by hand-operated hydraulic pump. This facilitates ease in cleaning.
• Scrapper assembly also designed to dismantle for ease of cleaning. A separate panel board which consist all controls and indicators of the compactor are permanently built in namely, on/off rolls, on/off feed screw, main switch, forward/reverse switch, ammeters for rolls and feed screw and emergency stop to avoid short circuit or fire hazard at the time of cleaning with water.
• Electrical interlocking between main roll drive and fixed screw drive. Water jacketing arrangement. (optional)
• Hydraulic power pack system for Rear Roller. (optional)
• AC Variable frequency drive for Rollers. (optional)

Additional Information:

• Production Capacity: As per Req
• Delivery Time: 4-6 weeks
• Packaging Details: packed in wooden box

The double cone blender is used to produce homogeneous mixture of dry powder and granules. Mixing is a one of the common step in the manufacturing of tablets, food, chemicals, cosmetics, detergents, fertilizers and plastics. The SLANT double cone design eliminates dead spots for mixing to get the effective volume for optimum homogeneity is between 35-70% of gross volume.

Salient Features All contact parts are made of SS316 and non-contact parts are made of SS304 Design as per cGMP - Current Good Manufacturing Practices compliance The conical shape at both ends enables uniform mixing and easy discharge Dust free bin charging system provided The cone is statically balanced to protect the gear box and motor from any excessive load Safety guard provided to ensure maximum safety of operator Fully Automatic operation based on PLC control (optional)

JSM Industries is a professional pharmaceutical machine manufacturer, which were applied to the field of hydraulics, Aerospace & Aviation, Electronics, Security & Safety, Medical, industrial equipment’s, automotive and many other industries.We also provide an automation solutions (LM guide ways, Ballscrews, Couplings etc.). Our company has adhered to the principle of Innovation, Diversification and International support.We started as very small unit in 1995 with few people. Now we have more than 50 people associated with us in delivering qualitative components to our customers around the globe. Denouncing pleasure and praising pain was born and we will give you a complete account of the system, expound the actual teachings. Our vision is to be a company that is refreshingly different, and believe in 100% customer satisfaction and 100% on time delivery. It is our work ethic that makes our customers, vendors and team members happy to work with JSM Industries. With every project that comes through our doors, we work as hard as possible to meet our customers’ requirements. We started as very small unit in 1995 with few people. Now we have more than 50 people associated with us in delivering qualitative components to our customers around the globe. Denouncing pleasure and praising pain was born and we will give you a complete account of the system, expound the actual teachings. Our vision is to be a company that is refreshingly different, and believe in 100% customer satisfaction and 100% on time delivery. It is our work ethic that makes our customers, vendors and team members happy to work with JSM Industries. With every project that comes through our doors, we work as hard as possible to meet our customers’ requirements. 

Conventional coating machine are used to sugar coat tablets in various industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds. The product is to be filled inside the pan. During the rotation motion, coating material is sprayed by spraying system according to the technological process and rational technological process. So process materials (product) are coated due to rotating pan. The coating round pot is rotated by variable speed. At the same time hot air is supplied through inbuilt Hot air blower system which dries rapidly (heating or cooling) and evenly thus forming a solid and smooth surface.

Salient Features:

• Fully Automatic operation based on PLC control. (optional)
• Design as per cGMP - Current Good Manufacturing Practices compliance.
• Interchange different size of Pan as per requirement.
• Overload pressure release mechanism allows maximum safety.
• All Contact parts are made from SS316/SS316L.
• Easy to replace polishing pan and other size coating pan.
• Closed powerful pan drive with reduction gearbox and motor with variable speed pulley.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: within 4-6 weeks
• Packaging Details: Packed in wooden box

De-Duster is pharmaceutical processing equipment that removes the fine surface dust from tablets through using vibratory effect. This machine can be linked directly to any type of high-speed tablet press.

It is mainly used to collect the dust and foreign particles which come out of the compression machine. Normally It is mounted directly at the output of the compression machine. We offer best quality with wide range of tablets (3-35mm dia.)

 

Salient Features:

 

•              Specially designed on vibratory motor principle

•              De-dusting disc penetration dia. is 3 mm to 35mm.

•              Mounted on a set of heavy-duty spring and pad

•              Better safety and protection

•              Design as per cGMP - Current Good Manufacturing Practices compliance

Additional Information:

• Production Capacity: As per your requirement
• Delivery Time: 4-6 weeks
• Packaging Details: Packing will be done in Wooden Crate

Pneumatic conveyors are widely used in various industries for transferring bulk quantities of materials from one place to a different one. Pneumatic conveying systems are specially designed to hold stream of air and mixture of bulk solid material.Pneumatic conveyor is a necessarily custom-made conveying system & based on product characteristics, particle size, throughput capacity, number of sources, and number of destinations. These Pneumatic Conveying Systems are designed, fabricated, installed and serviced by us on the data submitted to us by the buyer. The rate of transfer of material helps decide the size of the Power source, Filter and Cyclone If portability is required then a trolley is provided.JSM pneumatic powder conveying system is assured to be the best pneumatic conveying system solution for the application.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: 4-6 weeks
• Packaging Details: will packed in wooden crate

The double cone blender is used to produce homogeneous mixture of dry powder and granules. Mixing is a one of the common step in the manufacturing of tablets, food, chemicals, cosmetics, detergents, fertilizers and plastics. The SLANT double cone design eliminates dead spots for mixing to get the effective volume for optimum homogeneity is between 35-70% of gross volume.

Salient Features All contact parts are made of SS316 and non-contact parts are made of SS304 Design as per cGMP - Current Good Manufacturing Practices compliance The conical shape at both ends enables uniform mixing and easy discharge Dust free bin charging system provided The cone is statically balanced to protect the gear box and motor from any excessive load Safety guard provided to ensure maximum safety of operator Fully Automatic operation based on PLC control (optional)

Additional Information:

• Production Capacity: As per Req.
• Delivery Time: Within 4 weeks
• Packaging Details: Packed in wooden box

Conventional coating machine are used to sugar coat tablets in various industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds.The product is to be filled inside the pan. During the rotation motion, coating material is sprayed by spraying system according to the technological process and rational technological process. So process materials (product) are coated due to rotating pan. The coating round pot is rotated by variable speed. At the same time hot air is supplied through inbuilt Hot air blower system which dries rapidly (heating or cooling) and evenly thus forming a solid and smooth surface.Salient Features:• Fully Automatic operation based on PLC control. (optional)• Design as per cGMP - Current Good Manufacturing Practices compliance.• Interchange different size of Pan as per requirement.• Overload pressure release mechanism allows maximum safety.• All Contact parts are made from SS316/SS316L.• Easy to replace polishing pan and other size coating pan.• Closed powerful pan drive with reduction gearbox and motor with variable speed pulley.

Additional Information:

• Production Capacity: As per Req.
• Delivery Time: Within 3-4 weeks
• Packaging Details: Packed in wooden box